Head Unit

Head Unit
(AFX UK Focus) 2010-01-27 07:02 DAVOS-Intesa to list Fideuram unit in coming months
DAVOS, Switzerland, Jan 27 (Reuters) - The head of Italy's biggest retail bank Intesa Sanpaolo said on Wednesday plans to boost its capital base will be completed with the listing of an asset management unit, due in the coming months. "The decision (to list Fideuram) has already been taken," Intesa Sanpaolo Chief Executive Officer Corrado Passera told Reuters in an interview. "We will discuss ...
Head Unit Information Click Colored Links

I’ve been selling car audio amplifiers online for over a decade now. Through the years, the single most often asked question is “how do I select an amplifier for my new speakers or subwoofer?”

LetÂ’s try to de-mystify this selection process if we can. This information is presented to help the online-shopper make reasonable decisions. It is geared toward the published information that is generally available in most product descriptions on the web. LetÂ’s face the facts, if you have been in the line of car audio for years and have completed several installs, you know what you are looking for. But many, if not most online shoppers are not that familiar with the finer points of car amplifier installations.

Many, who are new to car audio will first look for “US made” as a stamp of high quality. Although that might have been true when I first started out decades ago, it certainly isn’t a serious guideline anymore. Honestly speaking, even some of the most famous named amps, associated with good old American production are in reality developed and manufactured in the Far East today. You will be very hard pressed to find any car audio products made in the USA today. In addition if you do find that one out of fifty brands that might be assembled in the USA, you’ll choke at the price.

Most shoppers will purchase their speakers or subwoofers first and then go shopping for an amplifier. So youÂ’ll have the recommended specifics in hand (for your speakers) as you start your amplifier search. This is definitely the suggested order if you desire to find a proper match.

Usually shoppers will immediately look at the power output of an amplifier first. When considering the power, you should also consider the maximum impedance specified by the amp. Most classic amplifiers by the likes of Nakamichi, Alpine, Linear Power, Orion, Precision Power, Eclipse, and US Amps will be capable of 2 ohm and even 1 ohm operation in the case of class D subwoofer amps. But in the real world, you should compare the ampÂ’s output capability at 4 ohms. In the majority of installs, you will be building a 4 ohm setup. At one time, the names mentioned above and most other quality amps would only publish their specific output at RMS or continuous power ratings and never the maximum output. Unfortunately, due to the changing market place, almost all amplifier manufacturers publish the maximum output of their amps. Beware of this since it can be most misleading. Lets be honest, who cares what an amplifier can produce for a period of 1 millisecond? Published maximum output is really very misleading and near worthless to the installer. This is nothing but an advertising ploy to make the shopper think he is getting more power for his dollar spent. We want to compare the continuous output of an amp since it is a much better method of comparison and represents how your amp will be used.

The second subject to check is the “signal to noise ration” (SNR) of an amplifier. Obviously the higher this ratio, the better it is. Although this is not particularly important if searching for a subwoofer amp, it certainly should be a deciding factor in purchasing a good amp to drive your mids and tweeters.

The above two points will enable a shopper to match an amp to his new speakers but there are several other more general points to consider also. One such point is: does your car radio or source unit have a low-level output connection? This allows you to connect directly to the standard low-level inputs on your amp. If your head unit isnÂ’t so equipped, youÂ’ll need an amplifier with a high-level input. This high-level input enables you to connect your speaker wires from your head unit directly to the amp. There are adapters available if your selected amp doesnÂ’t have this feature, so donÂ’t let this point rule out an otherwise acceptable amplifier.

You should also consider your physical location for your install before shopping. Be sure you can secure your amp properly and that the location provides enough air circulation. DonÂ’t forget to measure the installation area to ensure you purchase an amplifier that will fit. DonÂ’t laugh, IÂ’ve had more then a few customers over the years forget this basic requirement until it was too late.

If your amp will power two sets of speakers such as a component set in front and a coaxial or mids in the rear, I would recommend purchasing a four channel amp instead of a stereo amp. This will give you full fader control which will not be available if you split one stereo channel for two sets of speakers, front and rear. Sometimes your local installers will suggest going with multiple amps instead. Could the reason be that they desire to sell another amp and set of installation parts?

Another option to look for is built-in low-pass and high-pass crossovers. Finally, be sure your amp has a gain control. This is necessary to properly match your vehicle sound levels to your speakers when installed in your specific vehicle. This also allows you to purchase an amplifier that might be a bit larger or more powerful then your speakers with a view to expanding your system in the future. Going along with this thought, if purchasing a multi-channel amplifier, you should consider one capable of running at 2 ohms in case you ever decide to add a subwoofer at a later date. Spending a few dollars more up front can save you in the long run.

Hopefully these few points will enable you to select an amplifier to properly power your new speakers or subwoofer.

Den from Docswarehouse.com has been retailing car audio amplifiers, source units, speakers, subwoofers and video from the biggest names in car stereo for over a decade on the web. He makes it easy for the newbie as well as the experienced hobbiest to make the best possible decisions relating to car audio. Visit Doc's online outlet for the best car audio deals on the web. http://docswarehouse.com

Head Unit

• Power Car Amplifier
• Watt Mono Car

Tagged with: Amplifier Install • Audio Amp • Audio Amplifier • canadian speaker cable manufacturers • Car Amp • Car Amplifier • Car Audio • Car Audio Amp • Car Audio Amplifier • Car Radio • Car Stereo • Channel Amplifier • Head Unit • high quality • Speaker Wire • Stereo Amp